Chercheur et ingénieur professionnel (certification professionnelle italienne, 2013), j'aime lire, écrire, coder et résoudre problèmes. J'aime surtout enseigner et aider les autres à apprendre et à réussir.
Je suis titulaire d'un doctorat en matériaux composites polymèriques de Luleå University of Technology (2019) et d'un doctorat en science et ingénierie des matériaux de l'Université de Lorraine (2019). Je suis titulaire d'une maîtrise en ingénierie spatiale du Politecnico di Milano (110/110, 2013) ; d'une maîtrise en ingénierie mécanique de Drexel University (4/4, 2012) ; d'une licence en ingénierie aérospatiale du Politecnico di Milano (110/110, 2010).
J'ai acquis expertise en recherche et developpement, science et ingénierie computationnelles, science des données et développement de logiciels en travaillant à Drexel University, IMDEA Materials Institute, ETH Zürich, Université de Lorraine et Luleå University of Technology.

Articles dans revues avec comité de lecture

L. Di Stasio, J. Varna, Z. Ayadi, Energy release rate of fiber/matrix interface crack growth in cross-ply laminates under transverse loading: effect of the 0°/90° interface and of 0° layer thickness
Submitted to Composites Part A: Applied Science and Manufacturing, 2019
Preprint DOI: 10.31224/osf.io/7zxhy
Full-text preprint available
L. Di Stasio, Z. Ayadi, Finite Element solution of the fiber/matrix interface crack problem: convergence properties and mode mixity of the Virtual Crack Closure Technique
Submitted to Finite Elements in Analysis and Design, 2019
Preprint DOI: 10.31224/osf.io/4m6nj
Full-text preprint available
L. Di Stasio, J. Varna, Z. Ayadi, Energy release rate of the fiber/matrix interface crack in UD composites under transverse loading: Effect of the fiber volume fraction and of the distance to the free surface and to non-adjacent debonds
Theoretical and Applied Fracture Mechanics, 103, 2019
Peer-reviewed Publication DOI: 10.1016/j.tafmec.2019.102251
Preprint DOI: 10.31224/osf.io/z76j8
Full-text preprint available

Actes de congrès

L. Di Stasio, J. Varna, Z. Ayadi, Growth of interface cracks on consecutive fibers: on the same or on the opposite sides?
12th International Conference on Composite Science and Technology - May 8-10, 2019 - Sorrento, Italy
To appear in Materials Today: Proceedings
Full-text preprint available
L. Di Stasio, J. Varna, Z. Ayadi, Effect of boundary conditions on microdamage initiation in thin ply composite laminates
18th European Conference on Composite Materials (ECCM18) - June 24-28, 2018 - Athens, Greece
Conference proceedings
Full-text available

Communications dans congrès et Séminaires

L. Di Stasio, J. Varna, Z. Ayadi, Ply-thickness effect on fiber-matrix interface crack growth
9th International Conference on Composite Testing and Model Identification (COMPTEST2019) - May 27-29, 2019 - Luleå, Sweden
Presentation available
L. Di Stasio, J. Varna, Z. Ayadi, Growth of interface cracks on consecutive fibers: on the same or on the opposite sides?
12th International Conference on Composite Science and Technology (ICCST12) - May 8-10, 2019 - Sorrento, Italy
Presentation available
L. Di Stasio, J. Varna, Z. Ayadi, Investigation of scaling laws of the fiber/matrix interface crack in polymer composites through finite element-based micromechanical modeling
10th EEIGM International Conference on Advanced Materials Research - April 25-26, 2019 - Moscow, Russia
Presentation available
L. Di Stasio, J. Varna, Z. Ayadi, Effect of boundary conditions on microdamage initiation in thin ply composite laminates
18th European Conference on Composite Materials (ECCM18) - June 24-28, 2018 - Athens, Greece
Presentation available
L. Di Stasio, J. Varna, Z. Ayadi, Micromechanical models of transverse cracking in ultra-thin Fiber-Reinforced composite laminates
Journée de l'équipe 304 de l'IJL - July 5, 2017 - Nancy, France
Presentation available
L. Di Stasio, J. Varna, Z. Ayadi, Micromechanical modeling of thin ply effects on microdamage in Fiber Reinforced Composite laminates
International Materials Research Meeting of the Greater Region (IMRM) - April 6-7, 2017 - Saarbrücken, Germany
Presentation available

Communications en format poster

L. Di Stasio, J. Varna, Z. Ayadi, Micromechanical Models of Transverse Cracking in Ultra-thin Fiber-Reinforced Composite Laminates
Seminar of the Doctoral School EMMA (now C2MP) - May 4, 2017 - Nancy, France
Poster available

Thèses

L. Di Stasio, Influence of microstructure on debonding at the fiber/matrix interface in fiber-reinforced polymers under tensile loading
Doctoral thesis for Doctor of Philosophy (PhD) in Polymeric Composite Materials and Doctor of Philosophy (PhD) in Materials Science, 2019
Full-text available
L. Di Stasio, Experimental, analytical and numerical investigation of loading-rate effects on mode I, mode II and mixed mode I-II delamination in advanced CFRP
Master thesis for Master of Science in Space Engineering, 2013
Full-text available